Wamkelekile kule webhusayithi!
English
  • ibhena yasekhaya1
1.30 " Amancinci angama-128 × 64 Amachaphaza e-OLED yokuBonisa iModyuli yeSikrini esiveziweyo soMfanekiso
  • 1.30 " Encinci 128 × 64 Dots OLED Bonisa iModyuli yesikrini
  • 1.30 " Encinci 128 × 64 Dots OLED Bonisa iModyuli yesikrini

1.30 " Encinci 128 × 64 Dots OLED Bonisa iModyuli yesikrini

Inkcazelo emfutshane:


  • Inombolo yoMzekelo:X130-2864KSWLG01-H30
  • Ubungakanani:1.30 intshi
  • IiPixels:128×64 Amachaphaza
  • AA:29.42×14.7 mm
  • Ulwandlalo:34.5×23×1.4 mm
  • Ukukhanya:90 (Umz)cd/m²
  • Ujongano:I-Parallel/I²C/4-wire SPI
  • Umqhubi IC:CH1116
    • Khuphela njengePDF

    Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Inkcazo ngokubanzi

    Uhlobo lokubonisa OLED
    Igama lebrand UBULUMKO
    Ubungakanani 1.30 intshi
    Iipikseli 128×64 Amachaphaza
    Imo yokubonisa I-Passive Matrix
    Indawo esebenzayo (AA) 29.42×14.7 mm
    Ubungakanani bephaneli 34.5×23×1.4 mm
    Umbala Mhlophe/Blue
    Ukuqaqamba 90 (Umz)cd/m²
    Indlela yokuqhuba Ubonelelo lwangaphandle
    Ujongano I-Parallel/I²C/4-wire SPI
    Umsebenzi 1/64
    Inombolo yePin 30
    Umqhubi IC CH1116
    I-Voltage 1.65-3.3 V
    Ubunzima 2.18 (g)
    Ubushushu bokusebenza -40 ~ +85 °C
    Ubushushu boGcino -40 ~ +85°C

    Ulwazi lweMveliso

    I-X130-2864KSWLG01-H30 yimodyuli ye-OLED eyi-1.30" ye-COG; yenziwe ngeepixels eziyi-128x64.

    Le modyuli ye-1.30 ye-OLED yakhelwe ngaphakathi kunye ne-CH1116 yomlawuli we-IC;ixhasa iParallel/I²C/4-wire SPI ujongano.

    Imodyuli ye-OLED COG incinci kakhulu, ilula kunye nokusetyenziswa kwamandla aphantsi okulungileyo kakhulu kwizixhobo eziphathwayo, izixhobo ezinxitywayo, izixhobo zonyango ezihlakaniphile, izixhobo zonyango, njl.

    Umbane wokubonelela ngengqiqo yi-2.8V (VDD), kunye ne-voltage yokubonelela ngokuboniswa yi-12V (VCC).Ikhoyo ngoku kunye ne-50% i-checkerboard display yi-8V (kumbala omhlophe), i-1/64 yokuqhuba umsebenzi.

    Imodyuli ye-OLED yokubonisa ingasebenza kumaqondo okushisa ukusuka -40 ℃ ukuya +85 ℃;ubushushu bayo bokugcina busukela ku -40℃ ukuya +85℃.

    130-OLED3

    Apha ngezantsi kukho izinto eziluncedo kwesi Siboniso se-OLED samandla aphantsi

    1. Thin–Akukho mfuneko yokukhanyisa ngasemva, ukuzincama;

    2. I-engile yokujonga ngokubanzi :Idigri yasimahla;

    3. Ukukhanya Okuphakamileyo: 110(MIN) cd/m²;

    4. Umlinganiselo ophezulu wokuchasana (iGumbi eliMnyama): 2000:1;

    5. Isantya esiphezulu sokuphendula (＜2μS);

    6. Ubushushu bokusebenza ngokuBanzi;

    7. Ukusetyenziswa kwamandla aphantsi.

    Umzobo oomatshini

    130-OLED1

    Ulwazi lweMveliso

    Ukwazisa imveliso yethu yamva nje ye-1.30-intshi encinci yesikrini semodyuli ye-OLED.Le modyuli yokubonisa icwecwe kwaye iguquguqukayo yenzelwe ukubonelela ngamava abonakalayo akumgangatho ophezulu kwiinkqubo ezahlukeneyo zezicelo.Isisombululo samachaphaza angama-128x64 sinika imifanekiso ecocekileyo necacileyo kunye nesicatshulwa, siqinisekisa ukufundeka okuphezulu.

    Itekhnoloji ye-OLED esetyenziswe kule modyuli yokubonisa ibonelela ngeenzuzo ezininzi ngaphezulu kwezikrini zeLCD zemveli.Iipikseli ezizikhanyisayo zibonelela ngemibala eqaqambileyo kunye namanqanaba amnyama anzulu, okukhokelela kumohluko ongakholelekiyo kunye nokusebenza okubonakalayo okuphuculweyo.Ukongeza, umboniso we-OLED unombono obanzi wokujonga, ovumela abasebenzisi ukuba babone umxholo ngokucacileyo ukusuka kwii-angles ezahlukeneyo.

    Le modyuli incinci yokubonisa imodyuli ibonakalisa uyilo oluncinci olulungele ukudityaniswa kwindawo exineneyo.I-compact form factor iyenza ilungele izixhobo ezinxitywayo, i-electronics ephathekayo kunye nezixhobo eziphathwayo.Ukwakhiwa kwayo okulula kuqinisekisa ukufakwa lula ngaphandle kokongeza ubuninzi obungeyomfuneko.

    Imodyuli idibanisa abaqhubi abaphambili kunye nabalawuli bokuhambelana ngokungenamthungo kunye neenkqubo ezahlukeneyo zombane.Inokudityaniswa ngokulula kwi-microcontroller, i-motherboard okanye nasiphi na esinye isixhobo sedijithali ngokusebenzisa ujongano oluqhelekileyo.Uyilo olusebenziseka lula kunye namaxwebhu atyebileyo enza umanyano lube lula kwiingcali kunye nabangabasafundanga ngokufanayo.

    Le modyuli yokubonisa i-OLED inokusetyenziswa kwamandla aphantsi kwaye igcina amandla, iqinisekisa ubomi obude bebhetri yezixhobo eziphathekayo.Olu phawu, ludityaniswe nokubonakala kwayo okugqwesileyo kwindawo yangaphakathi nangaphandle, iyenza ibe sisisombululo esifanelekileyo sokusetyenziswa kwebhetri.

    Ukongeza kumgangatho obalaseleyo wokubonisa, imodyuli ikwabonelela ngokuqina okubalaseleyo.Idizayinelwe ukumelana neemeko ezinzima, ixhathisa ukothuka kunye nokungcangcazela ukuze kuqinisekiswe ukusebenza okuthembekileyo nakwimeko ezingqongileyo.

    Nokuba uphuhlisa iiwotshi ezihlakaniphile, izixhobo eziphathwa ngesandla, okanye nayiphi na enye imveliso yombane efuna isiboniso esikumgangatho ophezulu, i-1.30" isikrini semodyuli encinci ye-OLED lolona khetho lugqibeleleyo. Izisombululo eziguquguqukayo zoluhlu olubanzi lwezicelo.Phucula isiboniso semveliso yakho ngoku kwaye uhambise amava omsebenzisi aphuculweyo kunye neemodyuli zethu zokubonisa zeOLED.

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    Iindidi zeemveliso

    Cofa u-enter ukukhangela okanye i-ESC ukuvala